

An irrigation leak can show up as a soggy patch, bubbling water, a zone that suddenly loses pressure, a meter that continues moving, or water surfacing only when one zone runs. Fort Mill Irrigation diagnoses leaks in existing residential sprinkler systems and separates lateral-line leaks from valve, head, fitting and supply-side problems before excavation begins.
Some leaks are obvious because water surfaces quickly. Others remain underground and only show up as reduced pressure, unusually wet soil or a section of lawn that stays saturated. A broken head fitting may look like a line leak, and a valve that does not close fully can create constant seepage. Knowing when the leak occurs—only during a zone, continuously, or near the backflow/supply area—helps narrow the search.
We test the system first so the repair targets the actual irrigation failure.
We test the system first so the repair targets the actual irrigation failure.

Repair-focused irrigation service for Fort Mill and nearby communities. View all services.
Leak diagnosis follows the water path. We identify which zone or supply section is involved, observe pressure and flow behavior, and inspect likely fittings, heads, valves and exposed components. Excavation is then focused around the evidence instead of opening large areas of the yard. Repairs may involve PVC or poly piping, fittings, risers, valve connections or damaged sprinkler components.
Knowing exactly when the leak appears helps distinguish lateral piping, valve seepage and supply-side failures.
The goal is to narrow the likely failure area before digging so the repair remains as localized as practical.

Leaks can result from cracked fittings, broken risers, failed glue joints, root movement, freeze damage, equipment or edging damage, and older repairs. Changes in pressure or landscape work can expose weak points that had been stable for years. After the pipe or fitting is repaired, the zone should be tested again to confirm normal pressure and coverage.
If you have a wet area that appears when the sprinklers run—or a zone that suddenly lost pressure—leak diagnosis can determine whether the problem is underground piping, a head connection, a valve or the irrigation supply.
Common signs include wet soil, bubbling water, pressure loss on one zone, unexpected water movement or a wet area that appears only while irrigation runs.
Roots can move soil and place stress on shallow irrigation piping or fittings. Landscape work around roots can also damage existing lines.
The source may be a valve, fitting, nearby lateral line or drainage from surrounding soil. The timing of the water helps identify the cause.
Yes. Lost flow can reduce pressure and throw distance throughout the affected zone.
Yes. Broken underground irrigation piping and fittings can be repaired once the failure area is located and exposed.

Fort Mill Irrigation specializes in residential sprinkler repair, troubleshooting, maintenance, seasonal startup and winterization.
Call or text (803) 710-8008 for residential sprinkler repair, troubleshooting, spring start-up or winterization in Fort Mill and nearby communities.
Copyright © 2026 Fort Mill Irrigation. All rights reserved.